SATADOM-ML 3IS2-P

Features

SATA III solution for Server Boot-Up Drive
High IOPS to reduce boot up timing
Cable-less through Pin 7/Pin 8 connectors
Anti-vibration mechanical design
Built in iData Guard
Hardware write protection supported
Cost-effective Flash with iSLC
High less than 1U

BORN FOR SUPERIOR PERFORMANCE

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3IS2-P is designed as the smallest form factor size that could enhance compatibility with various design applications.

Innodisk SATADOM-ML 3IS2-P is designed for server field. The high of the SATADOM suit for 1U(44.5mm) high server, allow it to fit seamlessly into any server setup. Besides, the main benefit is going to be the ability to use a SATA boot device without using a drive bay.

The innovative Pin8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customers’ system without additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD), and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

iData Guard – DATA PROTECTION TECHNOLOGY

iData Guard enables the immediate sending of a command in the event of a sudden power failure, interrupting read and write commands from the system and ensuring that the last command can be completed. This preserves data integrity on the SSD, protecting data security.

iData Guard >

AES 256-bit DATA ENCRYPTION & TCG Opal 2.0 SUPPORT

Innodisk SSDs utilize AES 256-bit encryption, the US government’s standard for securing confidential data, while also supporting TCG Opal 2.0 for enhanced device management and user-friendly authentication.

AES & TCG Opal 2.0 >

iPower Guard – POWER PROTECTION TECHNOLOGY

iPower Guard is a proactive protection mechanism designed for environments with unstable power supplies. It provides further protection for SSDs during both startup and shutdown, preventing system performance issues caused by power instability.

iPower Guard >

Write Protect – SAFEGUARDING DATA SECURITY

With Innodisk SSD’s built-in write protection technology, users can utilize the read-only function to safeguard critical data within flash storage devices, preventing unauthorized modification or malicious use.

Write Protect >

100K P/E CYCLE, 33X LIFESPAN

The SATADOM-ML 3IS2-P, featuring BiCS5 112-layer 3D TLC NAND Flash and Innodisk's exclusive Ultra iSLC Technology, achieves an industry-leading 100K P/E cycle. This advancement extends the device lifespan by 33 times compared to conventional 3D TLC NAND Flash.

Ultra iSLC >

仕様

Model Name	SATADOM-ML 3IS2-P
Flash Type	iSLC (MLC)
Interface	SATA III 6.0 Gb/s
Form Factor	SATADOM-ML
Capacity	16GB ~ 128GB
Sequential R / W (MB/sec, max.)	560 / 450
P/E Cycle	20,000
TBW (Max.)	416
Storage Temperature	-55°C ~ 95°C
Max. Power Consumption	1.98W
Max. Channels	4
External DRAM Buffer	Y
Feature	H/W Write Protect, S.M.A.R.T.
Dimension (W x L x H/mm)	37.17 x 31.5 x 10.2
Vibration	20G@[7 ~ 2000Hz]
Shock	1500G@0.5ms
MTBF	>3 million hours
Warranty	5 Years

注文情報

Operating Temperature	Standard Grade (0°C ~ 70°C)	Industrial Grade (-40°C ~ 85°C)
20GB
40GB
80GB
160GB
320GB
640GB